Pivoting bearing DIN ISO 12240-1 E series steel/steel version with sealing 110 Steel bright
can be regreased, suitable for high alternating loads
Recommended fits for housing bores for installing pivoting bearings:
load normal - for steel housing K7, for light-alloy housing M7
load high - for steel housing M7, for light-alloy housing N7
load normal - for steel housing K7, for light-alloy housing M7
load high - for steel housing M7, for light-alloy housing N7
货号
10 90 0000 0110/001
标识符
Pivoting bearing DIN ISO 12240-1 (DIN 648) E series steel/steel version with sealing
Größe
110
材料组
Steel
表面
bright
材料
Bearing shell: ball bearing steel 1.3505 (100Cr6), hardened, grinded, phosphatised, molybdenite disulphide treatment
from size 15 deliverable with double face sealing (mbo standard 90, order number: .. 90 0000 ....)
from size 220 only deliverable with double face sealing (mbo standard 90)
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, phosphatised, molybdenite disulphide treatment
160
d Tolerance
0/-0,020
d2 Tolerance
0/-0,025
Static basic load rating C0 (kN)
3250
Angle of misalignment a°
6
Bearing radial tolerance in mm min. - max.
0,085 - 0,165
Mass (g) per piece
4830
润滑
lubrication with a pressure resistant grease on lithium soap basis with molybdenite disulphide additaments; working range: -30 °C to +130 °C; initial lubrication must be performed during initial operation
Rod end_Pivoting bearing
Pivoting bearing
Series
E series (small version)
Maintenance
needs maintenance
Threaded bolt
No
Sealing
Yes
Suitable for clevises
Yes