Pivoting bearing DIN ISO 12240-1 K series maintenance-free stainless steel with threaded bolt 6
suitable for high dynamic pressure loads and tensile forces
* only recommended for short-term running
Recommended fits for housing bores for installing pivoting bearings:
load normal - for steel housing K7, for light-alloy housing M7
load high - for steel housing M7, for light-alloy housing N7
Recommended fits for housing bores for installing pivoting bearings:
load normal - for steel housing K7, for light-alloy housing M7
load high - for steel housing M7, for light-alloy housing N7
货号
10 74 6482 0006/000
标识符
Pivoting bearing DIN ISO 12240-1 (DIN 648) K series maintenance-free version stainless steel with threaded bolt
Größe
6
材料组
Stainless steel
表面
bright
材料
Outer ring: stainless steel 1.4305 (X8CrNiS18-9), lathe work
Bearing shell: special bronze CuSn8 with glued-in PTFE fabric, alternative: stainless steel 1.4571 (X6CrNiMoTi17-12-2)
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, hard chrome-plated on the bearing surface, alternative: stainless steel 1.4034 (X46Cr13), hardened, grinded, polished or stainless steel 1.4404 (X2CrNiMo17-12-2), unhardened, grinded, polished
Threaded bolt: stainless steel 1.4305 (X8CrNiS18-9)
d
6
d Tolerance
H7
A
6,75
B
9
d1
8,9
d2
18
d2 Tolerance
h6
d3
M6 x 1
螺纹版
Regular thread right
d6
9
l6
18,5
l7
5,5
l8
10
sw1
8
Static basic load rating C0 (kN)
15,5
Permissible rpm*
530
Angle of misalignment a°
13
Bearing radial tolerance in mm min. - max.
0,005 - 0,035
Mass (g) per piece
22
润滑
no lubrication required; the ball slides on the PTFE fabric located in the bearing shell; working range: -50 °C to +150 °C
Rod end_Pivoting bearing
Pivoting bearing
Series
K series
Maintenance
maintenance-free
Threaded bolt
Yes
Sealing
No
Suitable for clevises
No