Rod end DIN ISO 12240-4 K high performance for high load with threaded bolt male thread 20 M20FG
can be regreased, suitable for high pressure loads and tensile forces
* only recommended for short-term running
货号
16 53 6482 2020/013
标识符
Rod end DIN ISO 12240-4 (DIN 648) K series high performance version for high load with threaded bolt male thread
Größe
20 M20FG
材料组
Steel
表面
galvanised
材料
Housing: thermal treatment steel 1.7225 (42CrMo4), forged, galvanised
Bearing shell: special bronze CuSn8
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, alternative: hard chrome-plated
Threaded bolt: undercut steel 1.0718 (11SMnPb30+C), galvanised
d
20
d Tolerance
H7
A
18
B
25
d1
24,3
d2
50
d3
M20 x 1,5 FG
螺纹版
Fine-pitch thread right
d6
24
h
78
l1
47
l2
103
l6
57
l7
12
l8
35
sw1
22
Static basic load rating C0 (kN)
93,5
Permissible rpm*
540
Angle of misalignment a°
14
Bearing radial tolerance in mm min. - max.
0,010 - 0,040
Mass (g) per piece
548
润滑
via cupped-type lubricating nipple DIN 3405; regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +250 °C; initial lubrication must be performed during initial operation
Rod end_Pivoting bearing
Rod end
Series
K series
Maintenance
needs maintenance
Thread
Male thread
Threaded bolt
Yes
Sealing
No
Suitable for clevises
No
Temperature
-50 °C - +250 °C