Rod end DIN ISO 12240-4 K high performance version stainless steel with sealing female thread 14 M14
can be regreased, suitable for higher rotation speeds
* only recommended for short-term running
Alternatively, there are also neoprene protective rubber caps for rod ends of size 6 to 35.
Alternatively, there are also neoprene protective rubber caps for rod ends of size 6 to 35.
货号
10 55 6483 1014/000
标识符
Rod end DIN ISO 12240-4 (DIN 648) K series high performance version stainless steel with sealing female thread
Größe
14 M14
材料组
Stainless steel
表面
bright
材料
Housing: stainless steel 1.4057 (X17CrNi16-2), forged, polished
size 40 stainless steel 1.4057, lathe work
Bearing shell: special bronze CuSn8, alternative: stainless steel 1.4301 (X5CrNi18-10), 1.4542 (17-4Ph) etc.
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, hard chrome-plated on the bearing surface, alternative: stainless steel 1.4034 (X46Cr13), hardened, grinded, polished
Sealing: NBR elastomer, temperature resistance -30 °C to +120 °C, resistant against mineral oils, greases and gasoline
Fitting rings: brass
Distance liner: stainless steel 1.4305 (X8CrNiS18-9)
d
14
d Tolerance
H7
A
13,5
B
26
B Tolerance
≈
d1
16,8
d2
36
d3
M14 x 2
螺纹版
Regular thread right
d4
20
d5
25
d7
12
d8
17
d9
29
h1
57
l3
25
l4
75
sw
22
Static basic load rating C0 (kN)
39,5
Permissible rpm*
750
Angle of misalignment a°
12
Bearing radial tolerance in mm min. - max.
0,010 - 0,040
Mass (g) per piece
170
润滑
via cupped-type lubricating nipple DIN 3405; regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +250 °C; initial lubrication must be performed during initial operation
Rod end_Pivoting bearing
Rod end
Series
K series
Maintenance
needs maintenance
Thread
Female thread
Threaded bolt
No
Sealing
Yes
Suitable for clevises
No
Temperature
-30 °C - +120 °C