Rod end DIN ISO 12240-4 K high performance version stainless steel with sealing male thread 8 M8
can be regreased, suitable for higher rotation speeds
* only recommended for short-term running
Alternatively, there are also neoprene protective rubber caps for rod ends of size 6 to 35.
Alternatively, there are also neoprene protective rubber caps for rod ends of size 6 to 35.
货号
10 55 6483 2008/000
标识符
Rod end DIN ISO 12240-4 (DIN 648) K series high performance version stainless steel with sealing male thread
Größe
8 M8
材料组
Stainless steel
表面
bright
材料
Housing: stainless steel 1.4057 (X17CrNi16-2), forged, polished
size 40 stainless steel 1.4057, lathe work
Bearing shell: special bronze CuSn8, alternative: stainless steel 1.4301 (X5CrNi18-10), 1.4542 (17-4Ph) etc.
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, hard chrome-plated on the bearing surface, alternative: stainless steel 1.4034 (X46Cr13), hardened, grinded, polished
Sealing: NBR elastomer, temperature resistance -30 °C to +120 °C, resistant against mineral oils, greases and gasoline
Fitting rings: brass
Distance liner: stainless steel 1.4305 (X8CrNiS18-9)
54
d Tolerance
H7
B Tolerance
≈
螺纹版
Regular thread right
Static basic load rating C0 (kN)
16,1
Permissible rpm*
1200
Angle of misalignment a°
10
Bearing radial tolerance in mm min. - max.
0,005 - 0,035
Mass (g) per piece
33
润滑
via cupped-type lubricating nipple DIN 3405; regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +250 °C; initial lubrication must be performed during initial operation
Rod end_Pivoting bearing
Rod end
Series
K series
Maintenance
needs maintenance
Thread
Male thread
Threaded bolt
No
Sealing
Yes
Suitable for clevises
No
Temperature
-30 °C - +120 °C