Rod end DIN ISO 12240-4 K maintenance-free for high load with sealing female thread 20 M20FG Steel
suitable for high dynamic pressure loads and tensile forces
* only recommended for short-term running
Alternatively, there are also neoprene protective rubber caps for rod ends of size 6 to 35.
Alternatively, there are also neoprene protective rubber caps for rod ends of size 6 to 35.
货号
16 54 6483 1020/013
标识符
Rod end DIN ISO 12240-4 (DIN 648) K series maintenance-free version for high load with sealing female thread
Größe
20 M20FG
材料组
Steel
表面
galvanised
材料
Housing: thermal treatment steel 1.7225 (42CrMo4), forged, galvanised
Bearing shell: undercut steel 1.0718 (11SMnPb30+C), galvanised with glued-in PTFE fabric on the bearing surface
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, alternative: hard chrome-plated
Sealing: NBR elastomer, temperature resistance -30 °C to +120 °C, resistant against mineral oils, greases and gasoline
Fitting rings: brass
Distance liner: stainless steel 1.4305 (X8CrNiS18-9)
CETOP RP 103 P
d Tolerance
H7
B Tolerance
≈
螺纹版
Fine-pitch thread right
Static basic load rating C0 (kN)
93,5
Permissible rpm*
190
Angle of misalignment a°
12
Bearing radial tolerance in mm min. - max.
0,005 - 0,045
Mass (g) per piece
415
润滑
no lubrication required; the ball slides on the PTFE fabric located in the bearing shell; working range: -150 °C to +250 °C
Rod end_Pivoting bearing
Rod end
Series
K series
Maintenance
maintenance-free
Thread
Female thread
Threaded bolt
No
Sealing
Yes
Suitable for clevises
No
Temperature
-30 °C - +120 °C