Rod end DIN ISO 12240-4 K series maintenance-free stainless steel with sealing female thread 12 M12
suitable for high dynamic pressure loads and tensile forces
* only recommended for short-term running
Alternatively, there are also neoprene protective rubber caps for rod ends of size 6 to 35.
Alternatively, there are also neoprene protective rubber caps for rod ends of size 6 to 35.
货号
10 56 6483 1012/000
标识符
Rod end DIN ISO 12240-4 (DIN 648) K series maintenance-free version stainless steel with sealing female thread
Größe
12 M12
材料组
Stainless steel
表面
bright
材料
Housing: stainless steel 1.4057 (X17CrNi16-2), forged, polished
Bearing shell: special bronze CuSn8 with glued-in PTFE fabric on the bearing surface, alternative: stainless steel 1.4571 (X6CrNiMoTi17-12-2)
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, hard chrome-plated on the bearing surface, alternative: stainless steel 1.4034 (X46Cr13), hardened, grinded, polished or stainless steel 1.4404 (X2CrNiMo17-12-2), unhardened, grinded, polished
Sealing: NBR elastomer, temperature resistance -30 °C to +120 °C, resistant against mineral oils, greases and gasoline
Fitting rings: brass
Distance liner: stainless steel 1.4305 (X8CrNiS18-9)
d
12
d Tolerance
H7
A
12
B
23
B Tolerance
≈
d1
15,4
d2
32
d3
M12 x 1,75
螺纹版
Regular thread right
d4
17,5
d5
22
d7
10
d8
15,5
d9
25,5
h1
50
l3
22
l4
66
sw
19
Static basic load rating C0 (kN)
34,5
Permissible rpm*
300
Angle of misalignment a°
10
Bearing radial tolerance in mm min. - max.
0,005 - 0,035
Mass (g) per piece
115
润滑
no lubrication required; the ball slides on the PTFE fabric located in the bearing shell; working range: -50 °C to +150 °C
Rod end_Pivoting bearing
Rod end
Series
K series
Maintenance
maintenance-free
Thread
Female thread
Threaded bolt
No
Sealing
Yes
Suitable for clevises
No
Temperature
-30 °C - +120 °C