Rod end DIN ISO 12240-4 K series standard version female thread 25 M24FG Steel galvanised
can be regreased, suitable for axial thrusts
1 个评论 since 30.04.2026
* only recommended for short-term running
订单号
18 50 6481 1025/013
SKU
0014794
MPN
DIN-648-25-M24FG-ST-VERZ
标识符
Rod end DIN ISO 12240-4 (DIN 648) K series standard version female thread
Größe
25 M24FG
材料组
Steel
表面
galvanised
材料
Housing: up to size 12 undercut steel 1.0718 (11SMnPb30+C), lathe work, galvanised
from size 14 thermal treatment steel 1.0402 (C22), forged, galvanised
Bearing shell: special brass CuZn38Al1
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, alternative: hard chrome-plated
d
25
d Tolerance
H7
A
22
B
31
d1
29,6
d2
60
d3
M24 x 2 FG
螺纹版
Fine-pitch thread right
d4
33,5
d5
42
h1
94
l3
42
l4
124
sw
36
Static basic load rating C0 (kN)
68
Permissible rpm*
230
Angle of misalignment a°
15
Bearing radial tolerance in mm min. - max.
0,010 - 0,050
Mass (g) per piece
750
CETOP
CETOP RP 103 P
润滑
via cupped-type lubricating nipple DIN 3405; regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +200 °C; initial lubrication must be performed during initial operation
Rod end_Pivoting bearing
Rod end
Series
K series
Maintenance
needs maintenance
Thread
Female thread
Threaded bolt
No
Sealing
No
Suitable for clevises
No
Temperature
-50 °C - +200 °C