Rod end DIN ISO 12240-4 K series steel/steel version female thread 8 M8 Steel galvanised
suitable for high unidirectional thrust loads, application only for low swivelling movements, unsuitable for complete revolutions
The boring in the steel housing is cylindrically taper-bored from one side and starts from the middle depending on the shape of the ball. This enables a high thrust load towards the ball mug.
货号
10 57 6481 1008/013
标识符
Rod end DIN ISO 12240-4 (DIN 648) K series steel/steel version female thread
Größe
8 M8
材料组
Steel
表面
galvanised
材料
Housing: up to size 12 undercut steel 1.0718 (11SMnPb30+C), lathe work, galvanised
from size 14 thermal treatment steel 1.0402 (C22), forged, galvanised
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished
CETOP RP 103 P
d Tolerance
H7
螺纹版
Regular thread right
Static basic load rating C0 (kN)
21,7
Angle of misalignment a°
14
Bearing radial tolerance in mm min. - max.
0,01 - 0,05
Mass (g) per piece
46
润滑
The steel/steel version is supplied without a lubricating nipple; regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +200 °C; initial lubrication must be performed during initial operation
Rod end_Pivoting bearing
Rod end
Series
K series
Maintenance
needs maintenance
Thread
Female thread
Threaded bolt
No
Sealing
No
Suitable for clevises
No
Temperature
-50 °C - +200 °C