Rod end DIN ISO 12240-4 K series steel/steel version male thread 20 M20FG Steel galvanised
suitable for high unidirectional thrust loads, application only for low swivelling movements, unsuitable for complete revolutions
3 个评论 since 28.07.2026
The boring in the steel housing is cylindrically taper-bored from one side and starts from the middle depending on the shape of the ball. This enables a high thrust load towards the ball mug.
订单号
16 57 6481 2020/013
SKU
0014580
标识符
Rod end DIN ISO 12240-4 (DIN 648) K series steel/steel version male thread
Größe
20 M20FG
材料组
Steel
表面
galvanised
材料
Housing: up to size 12 undercut steel 1.0718 (11SMnPb30+C), lathe work, galvanised
from size 14 thermal treatment steel 1.0402 (C22), forged, galvanised
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished
d
20
d Tolerance
H7
A
18
B
25
d1
24,3
d2
50
d3
M20 x 1,5 FG
螺纹版
Fine-pitch thread right
h
78
l1
47
l2
103
Static basic load rating C0 (kN)
63
Angle of misalignment a°
14
Bearing radial tolerance in mm min. - max.
0,01 - 0,06
Mass (g) per piece
348
润滑
The steel/steel version is supplied without a lubricating nipple; regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +200 °C; initial lubrication must be performed during initial operation
Rod end_Pivoting bearing
Rod end
Series
K series
Maintenance
needs maintenance
Thread
Male thread
Threaded bolt
No
Sealing
No
Suitable for clevises
No
Temperature
-50 °C - +200 °C