Rod end hydraulic DIN 24338 / complies in part with ISO 6982 110 M90FG Steel bright
can be regreased, with wide bearing according CETOP recommendation RP 58H for standard hydraulic-ylinders
1 max. torque of the screw
2 lubrication groove only in the bearing shell
Attention: size and thread are different; able to jam with screws DIN 912-8.8, position and quantity of the screws are in responsibility of the manufacturer
connection dimensions according to DIN 24333-24336 and ISO 6020/1, ISO 6022
2 lubrication groove only in the bearing shell
Attention: size and thread are different; able to jam with screws DIN 912-8.8, position and quantity of the screws are in responsibility of the manufacturer
connection dimensions according to DIN 24333-24336 and ISO 6020/1, ISO 6022
货号
20 94 6982 1090/001
标识符
Rod end hydraulic DIN 24338 / complies in part with ISO 6982
Größe
110 M90FG
材料组
Steel
表面
bright
材料
Housing: up to size 63 thermal treatment steel 1.0503 (C45), forged
from size 70 spherical cast iron GS400
Bearing shell: ball bearing steel 1.3505 (100Cr6), hardened, grinded, phosphatised, molybdenite disulphide treatment
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, phosphatised, molybdenite disulphide treatment
d
110
A
88
B
110
d2
235
d3
M90 x 3 FG
螺纹版
Fine-pitch thread right
h1
235
l3
106
l4
364
D
190
E
125
F
62
Torque Nm¹
710
Static basic load rating C0 (kN)
1200
Dynamic load rating C (kN)
655
Angle of misalignment a°
4
Bearing radial tolerance in mm min. - max.
0,065 - 0,135
Mass (g) per piece
32000
润滑
from size 16 with hydraulic lubricating nipple DIN 71412
Rod end_Pivoting bearing
Rod end hydraulic
Series
G series
Maintenance
needs maintenance
Thread
Female thread
Threaded bolt
No
Sealing
No
Suitable for clevises
No