Rod ends, rod end, DIN ISO 12240-4 (DIN 648) needs maintenance with male thread has mbo Osswald in its standard product range of mechanical linking elements. These are deliverable as high performance version for high load, K series, can be regreased and made of steel galvanised.

Rod ends DIN ISO 12240-4 (DIN 648) K series high performance version for high load male thread

can be regreased, suitable for high pressure loads and tensile forces

14 个评论 since 26.03.2026

For peak loads and dynamic changes of direction: This high-performance version for high load offers additional load reserves compared with classic high-performance variants. The male thread simplifies installation and readjustment in operation – a robust choice for cylinders and steering linkages under maximum demands.

描述

Rod end K series high performance version for high load male thread

Static basic load rating C0 (kN)

The static basic load rating C0 (see product details) denotes the value with which a rod end can in normal applications with a static load be stressed in the weakest cross-section without being permanently deformed. It represents the permissible radial bearing strain at rest. The basic load ratings quoted have been calculated using the respective material characteristic values and can be verified by tensile experiments at room temperature. The yield point was used to 80%, making the safety factor until yield start 1.25.

The static basic load rating also enables the permissible thrust load to be calculated:

Fa = Fa perm. = p • C0 (kN)

p = < / ~ 0.2 for rod ends K series high performance version for high load

Dynamic basic load ratings for rod ends are available on request.

立即询问
您的联系人：Daniel Fleuchaus +49 9345/670-143

Rod ends DIN ISO 12240-4 (DIN 648) K series high performance version for high load male thread - Dimensional drawing

欲查找所需货品，您可任选不同筛选标准，或在表格顶部搜索文本或文本和货号。
欲再次取消筛选器设置，请单击表格下方的“清空”按钮。
欲显示产品详细信息和 3D 模型，可单击与所需货品对应的行。